Start - Computer settings
Tutorial 1:
START - COMPUTER SETTINGS
Start - Image Import with Telemetry based Orientation
Tutorial 2:
START - IMAGE IMPORT WITH TELEMETRY AND GCP BASED ORIENTATION
Start - Image import witrh exif/gps based orientation
Tutorial 3:
START - IMAGE IMPORT WITH EXIF/GPS BASED ORIENTATION
Start - Image Import with GCP based orientation
Tutorial 4:
START - IMAGE IMPORT WITH GCP BASED ORIENTATION
3D model orientation with EXIF/GPS and Ground control points (GCP)
Tutorial 4.1:
ORIENTATION WITH EXIF/GPS AND GROUND CONTROL POINTS (GCP)
Volume calculation
Tutorial 5:
VOLUME CALCULATION
Digital orthophoto recalculation
Tutorial 6:
DIGITAL ORTHOPHOTO RECALCULATION
Volume calculation based on two surfaces
Tutorial 7:
VOLUME CALCULATION BASED ON TWO SURFACES
How to use Bounding Box
Tutorial 8:
HOW TO USE BOUNDING BOX
Point cloud editing tools
Tutorial 9:
POINT CLOUD EDITING TOOLS
Camera settings
Tutorial 10:
CAMERA SETTINGS
Waypoint flying DJI
Tutorial 11:
WAYPOINT FLYING DJI
Ground control targets setup
Tutorial 12:
GROUND CONTROL TARGETS SETUP
Profile tools
Tutorial 13:
PROFILE TOOLS
DOF merge
Tutorial 14:
DOF MERGE
Unknown camera parameters
Tutorial 15:
UNKNOWN CAMERA PARAMETERS
Contour lines
Tutorial 16:
CONTOUR LINES
Point Cloud Classification
Tutorial 17:
POINT CLOUD CLASSIFICATION
3D Measurements
Tutorial 18:
3D MEASUREMENTS
How to geotag images
Tutorial 19:
HOW TO GEOTAG IMAGES IN MISSION PLANNER

Tutorial 4.1:
ORIENTATION WITH EXIF/GPS AND GROUND CONTROL POINTS (GCP)

Welcome to 3Dsurvey Tutorials.

This tutorial explains how to improve 3D model orientation in 3Dsurvey using both EXIF/GPS data and Ground control points (GCP).

To manually correct / improve model orientation click Orientate -> Orientate with GCP. Then Browse for your file and open it for your coordinates to upload into 3Dsurvey. Click Next.

Continue by finding GCPs on your aerial imagery -> right-mouse click to select them. 3 ground control points need to be selected for 3Dsurvey to successfully find all the rest and make calculations accordingly.

In the next window you can check if all is ok, confirm or ignore particular targets/points and fine-tune 3Dsurvey's results.

All that is left now is to click Next, check the orientation accuracy in the table, and click Finish. And you're done! 

To find out how to reconstruct the model see our tutorial library, follow us or contact us directly.

Request for tutorial

SUBMIT!