Start - Computer settings
Tutorial 1:
START - COMPUTER SETTINGS
Start - Image Import with Telemetry based Orientation
Tutorial 2:
START - IMAGE IMPORT WITH TELEMETRY AND GCP BASED ORIENTATION
Start - Image import witrh exif/gps based orientation
Tutorial 3:
START - IMAGE IMPORT WITH EXIF/GPS BASED ORIENTATION
Start - Image Import with GCP based orientation
Tutorial 4:
START - IMAGE IMPORT WITH GCP BASED ORIENTATION
3D model orientation with EXIF/GPS and Ground control points (GCP)
Tutorial 4.1:
ORIENTATION WITH EXIF/GPS AND GROUND CONTROL POINTS (GCP)
Volume calculation
Tutorial 5:
VOLUME CALCULATION
Digital orthophoto recalculation
Tutorial 6:
DIGITAL ORTHOPHOTO RECALCULATION
Volume calculation based on two surfaces
Tutorial 7:
VOLUME CALCULATION BASED ON TWO SURFACES
How to use Bounding Box
Tutorial 8:
HOW TO USE BOUNDING BOX
Point cloud editing tools
Tutorial 9:
POINT CLOUD EDITING TOOLS
Camera settings
Tutorial 10:
CAMERA SETTINGS
Waypoint flying DJI
Tutorial 11:
WAYPOINT FLYING DJI
Ground control targets setup
Tutorial 12:
GROUND CONTROL TARGETS SETUP
Profile tools
Tutorial 13:
PROFILE TOOLS
DOF merge
Tutorial 14:
DOF MERGE
Unknown camera parameters
Tutorial 15:
UNKNOWN CAMERA PARAMETERS
Contour lines
Tutorial 16:
CONTOUR LINES
Point Cloud Classification
Tutorial 17:
POINT CLOUD CLASSIFICATION
3D Measurements
Tutorial 18:
3D MEASUREMENTS
How to geotag images
Tutorial 19:
HOW TO GEOTAG IMAGES IN MISSION PLANNER

Tutorial 19:
HOW TO GEOTAG IMAGES IN MISSION PLANNER

Welcome to 3Dsurvey Tutorials.

We'll show you how to geotag images in Mission Planner. This case applies to drones that do not automatically save GPS information in the image exif data. We start off with images we've captured with a drone and a separate log file from the flight path.

Run the Mission Planner software, press CTRL + F to open Temporary Options window and click the first option Georeference Images.

Browse to your log file and select it, do the same for pictures. Note that the path gets set automatically if the file is in the same folder.

Select Cam Message Syncro radio button, leave the presets as they are and click Preprocess. There is an option to create KML file, in this case we're skipping  it and going straight to Geotag Images. Important: only select aerial images for geotagging, the rest need to be deleted prior to importing them into misssion planner.

The result is a new folder named Geotagged, if you browse to image properties you will find GPS coordinates added to EXIF data.

That is our today's task done. To learn how to import images w/ exif data gps to 3Dsurvey see Tutorial 3.

 

Request for tutorial

SUBMIT!